2010 Price List and Ordering Information

To order products from EME Systems:
Please fax, email or call in the order to us. We accept qualified purchase orders, and we accept payment by check, wire, or credit card  (Visa, Mastercard, American Express, all with 2.5% surcharge).   Shipping charges dependent on destination.   Additional fees apply for export paperwork and handling.  

mailto:orders@emesystems.com
fax: (510) 848-5748
voice: (510) 848-5725
 
credit cards accepted

Back to Product Index

 
 

Manufacturer Code

Description

Price ($US)

LIGHT SENSORS and AMPLIFIERS

-

Light Sensors

-
LI-190SZ
quantum PAR sensor;
cable ends, stripped and tinned
430.00
LI-190SA
quantum PAR sensor;
cable ends in a BNC connector
445.00
LI-200SZ
pyranometer for wide band energy and heat load;
cable ends, stripped and tinned, 10 foot cable length
240.00
LI-200SA
pyranometer for wide band energy and heat load;
cable ends in a BNC connector, 10 foot cable length
255.00
LI-200SZ-50
pyranometer for wide band energy and heat load;
cable ends, stripped and tinned, 50 foot cable length
260.00
LI-200SA-50
pyranometer for wide band energy and heat load;
cable ends in a BNC connector, 50 foot cable length
275.00

LI-210SA
LI-210 photometer for human vision;
cable ends in a BNC connector
505.00



LI-193SA
underwater spherical quantum sensor;
requires 2222UWB underwater cable
895.00
LI-COR 2003S
leveling fixture
62.00
LI-COR LI-250
light meter
825.00
LI-COR 2222UWB
underwater cable
price available upon request

-

Amplifiers

-
UTA
standard UTA with polycarbonate enclosure
115.00
/BNC
BNC connector on input
add $10
/xxx
preset input for LIxxx= 190, 200 or 210
no charge
/v
preset output for v= 1, 2, 5, or 10 volts
no charge
/special
preset output range for non-standard value
add $15
/hobo
preset output range of 2.5 volts for Onset HOBO data logger
add $10
/NE
no enclosure; amplifier electronics only
subtract $15
HOBO VIC
HOBO Voltage input cable for use with UTA/HOBO
8.00
-
Example 1:
UTA/200/5..........UTA pre-configured for 0 to 5 volt output from LI200 Pyranometer:
price $115 ea
-
-
Example 2:
UTA/BNC/190/1............UTA pre-configured for 0 to 1 volt output ($115) from an LI190 Quantum PAR sensor with BNC input termination ($10):
price $125 ea.
-
UCLC
standard UCLC with polycarbonate enclosure
115.00
/BNC
BNC connector on input
add $10
/xxx
preset input for LIxxx= 190, 200 or 210
no charge
/i
preset output for i= 4-20 ma or 1-5 ma
no charge
/special
preset output range for non-standard value
add $15
/NE
no enclosure; amplifier electronics only
subtract $15
-
Example 1:
UCLC/200/420 ..............UCLC pre-configured for 4-20 ma output from LI200 Pyranometer:
price $115 ea
-
-
Example 2:
UCLC/BNC/190/420.............UTA pre-configured for 0 to 1 volt output ($115) from an LI190 Quantum PAR sensor with BNC input termination ($10):
price $125 ea.
-
USEA
standard USEA with polycarbonate enclosure, grips
115.00
/BNC
BNC connector on input
add $10
/gain
preset standard gain x2 to x1500
no charge
/special gain
for non-standard gain setting
add $10
/hobo
special gain for use with Onset HOBO data logger
add $10
/offset
offset adjustment, set to a millivolt level
add $15
/NE
no enclosure
subtract $15
-
Example 1:
USEA/200................USEA ($115) preset for x200 gain: price $115 ea.
-
-
Example 2: USEA/BNC/gain=40/offset=15mV................USEA ($115) with BNC input connector ($10), preset for special x40 gain ($10), and a 15 millivolt offset ($15):
price $140 ea.
-

TEMPERATURE and HUMIDITY SENSORS

-

Temperature Probes

-
TF/10
Fahrenheit output, 10 foot cable
75.00
TF/30
Fahrenheit output, 30 foot cable
85.00

-

Thermocouple Wire

-
TT-24S
type T 24 gage stranded w/teflon jacket
1.50 per foot

WETNESS and MOISTURE

-

Leaf Wetness Probes

-
LWET
standard LWET, 10' cable
75.00
/P
painted
add $3.00

-

Irrometer® Tensiometers and Accessories

-
IRSU-93/506LT
6" (15cm) length
265.00
IRSU-93/512LT
12" (30cm) length
270.00
IRSU-93/524LT
24" (60cm) length
275.00
IRSU-93/536LT
36" (90cm) length
280.00
IRSU-93/548LT
48" (120cm) length
285.00
RSU-93
4-20 mA replacement transducer
210.00
I1001
service kit
35.00
Ist12
stoppers
7.00 (per dozen)
ILTR
LT (Low Tension) tip
18.00
I200SS-5
watermark™ sensor, 5 feet cable
32.00
Other tensiometer types, lengths and accessories are available. Please call or email to inquire.
-
SMX Modules
-
SMX
 OEM moisture transmitter for Watermark sensors, unencapsulated
 24.00

encapsulated (weatherproof) SMX
60.00

STACHE MICROPROGRAMMER
STACHE
Microprogrammer for the Parallax Basic Stamp® II

now with firmware version 1.7b
99.00

OTHER ACCESSORIES

-

Batteries & Chargers

-
B1207 12 volt, 2.3 amp-hour gel cell battery 32.00
CG1129
12 V charger for 1--7aH SLA battery
85.00

-

Solar Panels

-
AE1205
Solar module with mounting bracket
5 watt, 17 volt max, 270 ma, 11" x 11"
139.00
AE1210
Solar module with mounting bracket
10watt, 21 volt max, 500 ma, 11" x 14"
177.00

DAVIS INSTRUMENTS

-

Anemometers

-
D6410
Vantage Pro II anemometer
mounts on the side of the mast support
145.00
D7903L
replacement wind cups, large size
13.00
D7903S
replacement wind cups, small size
13.00

-

Rain Gages

-
D7852
Rain Collector II, user selectable scale:
standard inch, 0.01 in. per tip
or metric, 0.2 mm per tip
80.00

-

Radiation Shields

-
D7714
passive radiation shield
70.00

------ Link to Davis Instruments page ----

Bat-Hat system and accessories (what's this?)


Microphone protection system


Bat-Hat bat-hat with preamp, shroud, bracket #1a, 1b or 1c, and reflector. (Cable cost is separate, see below.)
 265.00
Star-quad cable
 Canare 4E5AT Star Quad audio cable,
2.50 per meter
Teflon cable
 Premium FEP-88723 teflon cable
5.25 per meter

bracket style 3b with extra support leg
  add 7.00

Bat-Hat Accessories
EFG1008BH
 Fiberglass NEMA4 Enclosure 8"x10"x4", with SS hinge and hasp, prepared for Anabat(s), battery and charger.
 215.00
B1207
 Sealed Pb-acid battery, 12 Volt, 7 Ah
 32.00
CG1129BH
 Battery charger for solar to 12 V sealed Pb-acid battery and wiring harness for Anabat
 85.00
AE1205
Solar module with mounting bracket
5 watt, 17 volt max, 270 ma, 11" x 11"
139.00
AE1210
Solar module with mounting bracket
10watt, 21 volt max, 500 ma, 11" x 14"
177.00

replacement parts

reflector with SS hardware
 12.00

Aluminum bracket, styles 1a, 1b, or 1c
 23.00

Aluminum bracket style 3b
 30.00

Shroud coupler with hardware
 14.00
 

 <products index> <home> <top> logo <mail to: info@emesystems.com>